Content

Hot Water tank VS On Demand Systems

Tankless water heating systems have grown to be more commonplace, since in the long run, they save you money. Boasting cheaper operating and energy costs, tankless water heating systems are more effective and are greener than hot water tanks of the conventional type.

Traditional Hot Water Tank vs. On Demand Water Heater

With advancements in technological innovation, you can get on demand hot water anytime you need it, as opposed to hanging around for a water tank or cylinder to warm up.

There are actually several benefits of tankless water heating over the old procedure.

Heating Loss – Whenever water is preheated to be held in a tank, there’s a great deal of energy and heat losses. This will be avoided with on-demand hot water heaters.
Life Expectency – Regular hot water heaters usually last ten to fifteen yrs as compared with the almost double 20+ years life duration of an on-demand water heater. Thus, you save on repair costs. This consideration also helps to cover the higher purchase and installation cost which comes with tankless water heating systems.
Storage Tanks – By the use of tankless water heater solutions, you don’t require a storage tank. A regular water heater pre-heats and stores 25 – 50 gallons in its water tank which has to be warmed up continually. An on-demand water heater provides warm water whenever you need it, getting rid of large storage cylinders.
Power Bills – A conventional hot water heater pre-heats and heats water to a preset temperature level irrespective of your actual hot water needs. This may lead to highly inflated electric bills. With an on-demand hot water system, your usage of energy is linked directly with your hot water requirement. There is no pre-heating involved. For this reason, your power bills will come down.

If you’re needing to find a qualified hot water tank installer get in touch with an expert first to go over what your options are. Our recommendation is listed at the bottom of this article

Hot Water Heater Choices

Did you know that your Water Heating is the second largest expense in your home accounting for 14% to 18% of your Utility Bill. I didn’t make that up. That’s according to the Department of Energy (DOE).

Most people are unaware of the choices you have in Hot Water Heaters (HWH). Most often you go by a recommendation from the local plumber or Big Box Store. In fact, how many of us actually think about what kind and size of a hot water heater we will have installed. Better yet, the energy source. Usually, the only time you think about it is when you walk down stairs to your basement to do a load of wash and there is water all over the floor. At then it’s damage control and how are we going to take showers!

A conservative estimate is the average household spends between $400.00 and $600.00 per year on hot water. Again, not my statistics (DOE), I tend to think it is more. The energy source has a lot to do with it, the number of people in the household and the amount of water being heated. Another fact is that approximately 27 million households have HWH’s over ten (10) years old.

With a little planning there are many choices.

Here are the most common. 
a) Storage Tank Hot Water Heaters (HWH) 
b) On Demand Tankless Type 
c) Indirect Tankless Coil 
d) Indirect Tank Type 
e) Solar panels w/storage tank 
f) Heat Pump

Most consumers are familiar with (a) storage tank HWH. Typical fuel source is Gas, Electric, Oil, Propane, Geothermal and Solar. Each one of these has pros and cons. A lot depends on your budget and where you live geographically. The most inefficient one of the bunch would be (c) Indirect Tankless Coil. These were most popular on the East Coast. The engineering is simple which I won’t go into. The theory behind it is that the Hot Water Boiler would be running seven months a year to heat your house so during that time one would not use considerably more BTU’s to heat the domestic hot water as well. This was okay when fuel oil was a buck ($1) a gallon!

Let’s stick with the most popular HWH (storage tank type “a”) and give you some tips on how to be Energy Efficient and practical as well. And do not forget periodic maintenance.

Energy Efficiency

1) The most common energy source would be electric and natural gas. Natural Gas being more energy efficient and having a higher recovery rate.

2) Insulate the HWH with an insulating blanket. These can be purchased according to size. You can also use duct wrap or batt insulation and a lot of duct tape. This will help the standby loss. (the temperature drop of the water sitting in the tank idle)

3) Insulate the hot water piping minimum 10 feet from the HWH. If the heater is in an exposed basement insulate all the hot water piping.

4) Set the temperature of the HWH to 120 degrees.

5) Install low flow shower heads and faucets throughout.

6) Wash your clothes with cold water whenever possible.

7) Purchase Energy Star Appliances.

Periodic Maintenance

1) Check the pressure and temperature valve (T&PV) every six months. This is the safety valve to prevent the HWH from blowing apart. It should not be leaking, capped or be rusted. I advise having a plumber give it a once over until you are familiar with what to look for.

2) Check and replace the Anode Rods when needed. This keeps the HWH from corroding.

3) Flush a quart of water or so from the hot water tank every few months to remove any sediment.

Well, that’s the short course on hot water heaters. If your HWH is more than five years old plan ahead. It always pays to be prepared

KCs Plumbing and Heating Ltd
1896 Kingsway
Vancouver, BC V5N 2S7
(604) 873-3753
Place ID ChIJtQ7EzKh2hlQR0RV88aluvys

How To Get The Best Percentage Rate on Loans

A low APR (Annual Percentage Rate) loan is almost always provided to loan applicants whose credit rating is excellent. You can do a lot to improve your chances of getting a low-interest rate loan for personal needs by improving your credit score. Besides your credit score, there’s little alternative to getting any loan at a low-interest rate.

Of course it is feasible to get financing from family and friends members, in which the rates are truly low. In fact generally, loans obtained from friends and family members in addition to out of your office, don’t attract any interest at all. However, if you want to borrow from regular lenders similar to banks along with other mainstay lending institutions, you should be considering these steps to help you get mortgage at a low rates.

Listed here we show you 4 tips to increasing your credit rating if it is not good.

1. First Things First.

Fix your credit score. Low APR personal loans are normally provided to applicants with high or stellar credit scores. To boost your credit rating, remove as much of your debt as you can and pay your bills on time. Also refrain from making way too many credit enquiries. Whenever, you make a credit enquiry by getting a loan or credit card, it lowers your credit score.

2. Submit an application for Personal Loans Using Collateral.

Unsecured personal loans have high interests rates even if you have excellent credit score. So to get a low APR loan for personal needs, consider acquiring a secured loan instead. For instance, you can use your vehicle title as collateral. It is usual that the value whatever the collateral must be equal to how much loan you wish to borrow. Secured loans usually come at lower rates than personal loans.

3. Utilizing a Co-Signer

The subsequent tip of insufficient APR loan for personal needs is to get a co-signer. This is also called a co-debtor. You can ask a relative (parent, sibling or spouse) who possess good credit rating to sign mortgage with you. When you have a co-signer, lenders keep in mind their credit rating whatever the before determining the rate of interest that they give you the loan.

The APR shall be low when the co-signer has a superb rating. Be sure that you do not default on mortgage because if you do, then a co-signer will have sole responsibility when it comes to paying the remainder of the loan and of course the interest. Besides it will negatively affect his or her credit rating so be aware of this.

4. Comparison Shopping.

There a variety of lenders with different rates. So do some essential comparison shopping using loan comparison websites. Once you’ve compared some lenders, contact a couple of them and seek a quote. They would take the information you give and calculate the rate of interest and monthly repayment amounts, and send you everything you need to know on that loan. Choose one with the lowest APR.

Whenever you get mortgage know that it is a great the opportunity to rebuild your credit rating. Follow the ideas in 1st step above and within 6-twelve months you should see your credit score begin to improve. Continue the process and as time passes, your credit score too shall be near becoming excellent.

From that point forward once you have obtained an excellent credit rating, you’ll be able to apply for most loans and intend to get a low APR.

Keeping an HVAC System Running at Peak Efficiency

An efficient HVAC system is very important when it comes to maintaining a comfortable, healthy interior environment. Through the years many people inquire about a technique to reduce their cost of energy and HVAC. They don’t want to sacrifice the comfort of their working environment, but they do want a good plan on how to save money and equipment. The interesting thing that often happens may be that energy bills are reduced substantially and of course the HVAC efficiency is enhanced. This is a normal function of any HVAC service technician.

Energy Optimization

Step one to acheiving system optimization is to reduce the load. This step normally involves a well thought out plan itemizing required sets to take based upon best return on your investment. Reducing the system load will allow it to operate more efficiently. In case a new system or systems are now being considered, it will be more economical to design for a load reduction as opposed to the prevailing load. A few common load reduction strategies include:

1. Tighten the building shell and add supplemental insulation. Upgrading insulation in an existing building may not be achievable for some, so more deliberation should be aimed toward the outside shell, especially windows and doors.

2. Fitting energy-efficient windows. This is a big item for some buildings that have single pane windows. The installation of double pane windows with a thermal break is a great return on your investment. Make sure they’re ENERGY STAR qualified windows. Tinting or Low-E coatings will even be the best.

3. Upgrading the lighting system. The average commercial building has a lighting density of 2-3 watts per square foot to maintain a comfortable lighting level. This is a big part of the HVAC load and nearly all efforts in this direction will reduce the cooling requirement of the building. Accent lighting (sometimes called architectural lighting) are not guaranteed to be power efficient and should not be looked at if you want to reduce energy and HVAC expenses. Energy-efficient lights release less heat into a cooled evironment than older light bulbs. When you have a return air plenum rather than return air ductwork, consider light troffers so that some of the heat from the illumination is sent back to the HVAC system rather than bleeding into the occupied areas.

4. Selecting equipment with better efficiency ratings that have the power saver selection will decrease the heat gain in the space. Items to think about include copy machines, kitchen equipment, computer systems and refrigerators.

5. Balance outside air with controlled ventilation. Many building owners have drawings of the original HVAC system installation. Have the drawings analyzed by an outside professional to verify your air-flow rates conform to the latest code requirements. If no sketches can be found, your engineer be able to make recommendations for improvement.

Dealing with these things is your first task to reducing energy and HVAC expenses.

Heating and Air Conditioning Systems

The second step to realize system optimisation is knowing it. Your HVAC system is critical for your interior setting, it also represents a large factor of your utilities. Even though it is past the information in this article to debate every system, a couple of recommendations can be covered. Each system component has grown in efficacy during recent years. If your system is more than 13 years of age, it is time to begin planning for replacing the system. Regularly serviced residential systems have a life expectancy of around fifteen years give or take, but seem to shut down at the worse times. You should have a replacement plan ready for when your equipment does fail.

Business systems vary, but when your structure is using specially designed systems, a similar lifetime should be likely. For industrial or large business systems, the HVAC system could also be more complex and require a closer look by a mechanical engineer. As I said, These types of systems will vary so an individual analysis works best for larger systems. What most of these systems have in common is they’re usually driven by electricity. Electricity has its price, so any improvement toward enhanced performance can be a good thing.

HVAC System Points:

Find a qualified contractor you can trust. If you are a home owner or small commercial building owner, find a good HVAC business or mechanic to evaluate and maintain the system. If you are a large property owner, look for a commercial HVAC company for normal maintenace and repair and a good mechanical engineer for impartial guidance. We do advise against using a mechanical engineer who works for the HVAC Company; find a 3rd party contractor for impartial information.

Verify your HVAC system load. Commercial structures have more complex settings regarding code conformance, minimum ventilation rates, etc and therefore are individual to each building.

Choose equipment rated for the load. NEVER OVERSIZE! Going overboard does not work for HVAC systems. It will cost more to buy the apparatus as well as operate it. Consult with your contractor to figure out the proper capacity

Buy high efficiency or Energy Star equipment. Most of the new systems also have variable speed drives for fans and compressors. Through your years of ownership this is paid back repeatedly. If you compare standard efficiency equipment to high efficiency equipment in terms of initial cost and running expenses. Any good HVAC company or contractor can get this information for you.

Consider some form of power recapture for air that is exhausted from the place and re-use it to enhance the incoming clean air. That is the air you’ve paid to condition, so using some of the energy before exhausting it should be top priority.

For large commercial properties, think about conditioning the outside air with a specialized exterior air unit. This will eliminate any problems with moisture control in many circumstances. It may also increase comfort levels and enable further downsizing of equipment.

Commercial complexes might want to look into equipment economizers. Many current codes want economizers on equipment in excess of 15 tons in size. Often available at a low initial cost during set-up, these units use fresh air from outside whenever the temperature (or humidity) outside is less than the inside temperature.

Both home owners and small commercial building owners should think about installing thermostats you can program. Commercial buildings can install a custom digital control system. The investment will pay back more than the price in a short time.

Control Systems

The third step to achieve energy and HVAC system optimization is controlling your system.

Programmable Thermostats: A great investment for the homeowner is a programmable thermostat. These are really easy to use and incorporate strategies based on a schedule. Most suppliers offer 7 day programs which will control the HVAC system timing and temperature. That is a wonderful way to make sure the system is used only when necessary.

DDC Systems: For the large commercial building, I consider this as an essential system. Installation costs are lower now and of course performance is better. They are often incorporated into any system and expanded as needed. Some of the more accepted features of these solutions are enhanced start/stop, multiple zone controls, temperature sensing unit and venting control. A key benefit of these systems is their capability to be scaled up to the largest of commercial applications. This means you’ll be able to install a something simple to begin with then add more controls later to incorporate your whole HVAC system. The payback is quick and well worth the investment.

Coil Cleaning: This is always a big item ignored by almost everyone. Condenser coils tend to collect dust and debris because they are outside. Diry coils make the compressor work harder and leads to a higher refrigerant temperature in the refrigerant system. Dirty evaporation and heating coils collect dust and fibers that circulate inside your home or building. They must be cleaned at least once a year

Operation and General Maintenance

The fourth and last step to realize energy and HVAC system optimization is regular upkeep. The most effective systems are well maintained. You can ensure dependability, efficacy and a long life for your HVAC system by using these guidelines.

Find a professional consultant you can trust. Find a good company or mechanic to assess and work on your system. Assuming you are a large business owner, find a commercial|an industrial} HVAC business for normal upkeep. Make sure you keep track of servicing with when they vist and what they did each time.

Home owners should always get a regular tune up. The operation of your system will vary depending on the time of year.

Replace air filters on a schedule. Always use quality filters to assure dust and fibers are removed. Clean filters will save fan energy.

Summary

Optimizing your HVAC system will help to lower electrical fees. General knowledge of your system and familiarizing yourself with money saving techniques will reduce your costs and increase the life span of your equipment.

Optimizing for A Specific Company Type Like Gutter Services

Building a website for your business is an excellent way of generating leads and increasing sales for a Gutter service business. More and more people are using the internet when searching for somebody to carry out their guttering or fascias work rather than using traditional directories such as the yellow pages, hence the importance of having a strong online presence.

Site Structure

To allow the user to easily navigate around the site you should consider the following structure:

  • Homepage – introduction to the business, overview of areas covered and teasers for each of your services with links to view more info.
  • Guttering – information about your Guttering service, including prices if possible.
  • Fascias – information about any fascias work you can carry out, again, including prices if possible.
  • Exterior Painting – details of any exterior painting you can carry out, including surfaces you can paint.
  • Roof repairs – information of any roof repair services you provide, including prices if available.
  • Contact – contact details including telephone number and contact form.

It is best to have a specific page for each of your rain gutter installation services but if you are struggling to write enough content you may wish to put details of all of your services on a single page. Remember to include images where possible to demonstrate the quality of your work, either by taking photographs of completed work or by using stock images.

Ask Your Customers For Testimonials

Get 3 or 4 testimonials from previous customers to show that you can be trusted to do a good job. You may want to place your customer testimonials on a single place or as a aide block on each web-page.

Allow Customers To Request A Detailed Quote

Provide users with a contact form that will allow them to easily submit an inquiry to you so they can request a quote for their work or simply get in touch if they have any questions about any of your services. The contact form should ask for the users name, contact number, email address and provide them with a text area to input their message. Be sure to provide the user with feedback so they know the form was successfully submitted – either by redirecting them to a “thank you” page or using a message box.

Set Up A Google Business Place

Create a listing for your business in Google’s local business center to help generate traffic to your website. You need to add as much information as possible including photos, services, description, operating hours and of course, website address. When adding information to your business page try to include as many keywords as possible as this will increase the chance of potential customers finding your page when searching for guttering or fascias in your area.

Optimizing For Search Engines

SEO will help drive traffic to your website by obtaining click-through’s from organic searches. You should use on-page SEO techniques such as using relevant page titles and heading tags as well as off-page techniques including link-building and blogging.

Promote your website using Social Media

You can use social networking sites such as Twitter and Facebook to drive traffic to your website. Create a twitter account which can be embedded on your website and use it to create a group of followers who you can target with regular tweets promoting your services. You can connect your twitter account to your Facebook account so tweets are automatically posted on your Facebook profile. Creating a Facebook page would be useful and you can customize the page by adding photos of your work, adding you logo and cresting custom tables describing your services.

Use Pay-Per-Click to Generate Traffic Quickly

Pay-Per-Click is an excellent way of generating traffic to your site whence first goes live (before any search engine optimization has time to take effect). You can filter your ad to only be listed when users search for your services to help you drive relevant traffic to your site. Pay-per-click ads usually appear at the top and right of search engine result pages.

When linking back to your site from outside sources use keywords that have commercial intent. That means that when a person is searching for your service their intent is to hire a professional. If the keywords being typed in are fairly general,  it usually means they are researching the subject. When the keywords include terms like service, install, contractor, company, and so on they are probably ready to hire a contractor. Here is a commercial intent good keyword example of that principle. Use the keyword gutter installers Vancouver as anchor text in a sentence of the article used to drive traffic back to your business website. This type of link is referred to as “in context” meaning it is embedded in the content of an article.

How to Write Content That Helps Improve Search Positions

When ordering SEO content for a client, one of the most common mistakes rookie consultants make is to continually write about the dark side of the industry they are promoting. For instance, it is a well know fact that there are scam artists in almost every home service business. You see consumer reports about shady roofers, plumbers, construction  companies and the like.

If all you do is write about the negative stuff, warning consumers of those dangers it gets seriously boring, inviting skepticism instead of helpful information. The way I look at it, I think people are already aware of the double talk in those fields. They already have their BS radar on and don’t need useless information about what to avoid. Give them tips on how to do something themselves, or new industry information on how to save money on a purchase.

In the heating industry there is a constant stream of homeowners needing to replace their furnace, their hot water tanks, the air conditioning, etc. They will appreciate information that directs them towards a purchase that will save them money on energy, repair and service maintenance, rather than some crap about what scam to avoid.

When writing or ordering your content, make sure the writer understand you want to provide helpful information because a lot of these online writers are after the fast buck and will default to the negative stuff. You must guide them to the other side Luke.  LOL

Here is a prime example of how to write a helpful article for a plumbing company.

Plumbing repairs can be very costly. Truth is, wear and tear on your fixtures is inevitable and could occur anytime. Your sink might get clogged up in the wee hours of the morning and there is no one you can call for help.

As much as we want to deal with the problem without having to hire the services of a professorial, the most practical way to address the issue is to ask for help. While you can always hire the services of a professional plumber, there are a few plumbing tips you can employ at home in order to avoid costly repairs.

A little problem that is left untreated can actually turn into a nightmare. If you see a leak on your service pipe, take necessary actions to have it fixed. Remember that no matter how small the problem is, it needs to be taken care of right away.

Small repairs such as changing the washer or cartridge don’t require the expertise of a plumber. You can actually do it yourself without having to call for help. But if you feel that you can’t handle the problem as it is beyond your skills, call for some help as soon as the problem occurs.

Home maintenance should include taking care of any material that may cause your drain and sink to clog up. Likewise, you also have to take care of the grease and oil buildup that clog up you sink. To address the problem, you must collect excess grease in different containers and then dispose it when it solidifies.

Another option is to hire the services of a reputable plumbing company. The plumbing company will check your system every so often and could prevent you from worrying about major plumbing issues in the future. Remember that the sooner you take preventive actions, the more money you can save on costly repairs.

Truth is, your plumbing system eats a portion of your income. If you notice any part of your plumbing system that needs repair, then you might want to consider replacing it. Sometimes, replacing a system is considered a wise investment. It is better to spend money and have your fixture replaced than incur recurring fees for costly repairs.

Make sure you check your water-heater, faucets and shower heads. If you have hired the services of a plumbing company, make sure you have everything checked and ask for possible replacements.